LPD Pattern 10 Glazed FD30 White Prime Fire Door

Description

See the LPD Pattern 10 Glazed FD30 White Prime Fire Door in our Ilford showroom, alongside over 300 other doors on display.

The simple Pattern 10 design with a raised square moulding around the glass, made as a fire door.

As an FD30 fire door it gives up to 30 minutes of fire resistance when hung in a matching fire-rated doorset. It has an engineered build, comes double coated and ready for final finishing, and is FSC® certified. The toughened safety glass meets BS EN 12150, and LPD give a 10 year manufacturer's guarantee against defects. It needs three hinges, can be trimmed by up to 3 mm on each edge, and a 75 mm latch is recommended. The installer must follow LPD's fitting guidance for fire doors, available on request. Odd size doors are our speciality. If your opening is a non-standard size, bring us your measurements and our own joinery workshop can make a door to fit.

Key features

• White primed: ready to paint
• FD30 fire rated (30 minutes)
• Glazed
• FSC® certified

Fitting and care

Give the primer a light sand, then apply your top coats. Seal any cut edges straight away if you trim the door. Fire doors must be hung in a suitable fire-rated frame with intumescent seals, fire-rated hinges and, where required, a self-closer. Do not trim beyond the manufacturer's limits, or the fire rating may be affected.

See them at our Ilford showroom: over 300 doors and over 200 handles on display, plus a large range of locks and door hardware, free parking, and odd sizes made to measure in our own workshop. Call 0208 599 0200.