Mendes Iris 2 Panel RM FD30 Oak Unfinished Fire Door

Description

See the Mendes Iris 2 Panel RM FD30 Oak Unfinished Fire Door in our Ilford showroom, alongside over 300 other doors on display.

Solid oak raised mouldings around each panel give the Iris a traditional, crafted look. It is supplied unfinished, ready for the oil, stain, varnish or paint of your choice.

As an FD30 fire door it gives up to 30 minutes of fire resistance when hung in a matching fire-rated doorset, so it is a good choice for kitchens, garages, loft conversions and flats where building regulations call for fire doors. Odd size doors are our speciality. If your opening is a non-standard size, bring us your measurements and our own joinery workshop can make a door to fit.

Key features

• Oak
• Unfinished: ready for your own finish
• FD30 fire rated (30 minutes)

Fitting and care

Store the door flat in the room where it will be hung, and seal all faces and edges, including the top and bottom, before fitting. A light sand with fine paper gives the best finish. Fire doors must be hung in a suitable fire-rated frame with intumescent seals, fire-rated hinges and, where required, a self-closer. Do not trim beyond the manufacturer's limits, or the fire rating may be affected.

See them at our Ilford showroom: over 300 doors and over 200 handles on display, plus a large range of locks and door hardware, free parking, and odd sizes made to measure in our own workshop. Call 0208 599 0200.