Deanta Ascot White FD30 Primed Fire Door image

Deanta Ascot White FD30 Primed Fire Door

Categories: White Primed Fire Solid Deanta

Model: ASCOT

£162.00

 

Description

See the Deanta Ascot White FD30 Primed Fire Door on display in our Ilford showroom, where we have the full Deanta range side by side.

A single bevelled panel with diamond moulding, set just below centre, makes the Ascot a strong, attractive door for any room. This version comes white primed, ready for your top coat.

It is an FD30 fire door, giving up to 30 minutes of fire resistance when fitted in a suitable fire-rated frame. That makes it suitable where fire doors are required, such as loft conversions, flats and doors into an integral garage. It comes in three sizes, from 686 mm to 838 mm wide, all 1981 mm high. At 45 mm thick, it weighs between 38 kg and 49 kg depending on size. The trimming allowance is shown with the sizes below. If your opening is an odd size, our workshop can make a door to fit.

Key features

  • FD30 fire door: up to 30 minutes of fire resistance when fitted as part of a correctly specified fire door assembly
  • White primed, ready for a finish of your choice
  • Third-party certification approved by BM TRADA Q-Mark
  • FSC® Certified sustainable timber
  • Solid core construction for extra strength, stability, and robustness
  • Striking design, diamond shaped bevelled-edge panel
  • Covered by Deanta’s 10-year manufacturer’s warranty

Fitting and care

Supplied primed. Finish with a top coat of paint on both faces and all edges. Fire doors must be fitted in a suitable fire-rated frame with intumescent seals, fire-rated hinges and, where needed, a self-closer, and trimmed only within the limits of the fire certificate. Deanta’s care and installation guide has full instructions.

Sizes and weights

Size (H × W × T)ImperialWeight
1981 × 686 × 45 mm78" × 27"38 kg
1981 × 762 × 45 mm78" × 30"42 kg
1981 × 838 × 45 mm78" × 33"49 kg

Solid 18 mm lippings. Up to 30 mm in total can be trimmed from the width and from the height (15 mm per edge), within the limits on the fire certificate. Weights are per door, from Deanta's 2026 product data. Ask us about other sizes: odd sizes are our speciality.

Need an odd size?

Odd size doors are our speciality. If your opening is a non-standard size, bring us your measurements and our own joinery workshop can make a door to fit.

See them at our Ilford showroom: over 300 doors and over 200 handles on display, plus a large range of locks and door hardware, free parking, and odd sizes made to measure in our own workshop. Call 0208 599 0200.

Images are for illustrative purposes only