Deanta Pamplona Oak Pre-finished Internal Door
Product code: DRU000151
Categories: Oak Grooved Solid Deanta
£155.00
Description
See the Deanta Pamplona Oak Pre-finished Internal Door on display in our Ilford showroom, where we have the full Deanta range side by side.
Horizontal and vertical veneers set against each other show off the grain, with gentle curves that give the Pamplona a subtle 'waist'. This version comes pre-finished in oak, so it is ready to hang.
It comes in four sizes, from 610 mm to 838 mm wide, all 1981 mm high. At 35 mm thick, it weighs between 27 kg and 36 kg depending on size. The trimming allowance is shown with the sizes below. If your opening is an odd size, our workshop can make a door to fit.
Key features
- Crown Cut American White Prefinished Oak
- FSC® Certified sustainable timber
- Solid core construction for extra strength, stability, and robustness
- Gentle curves, contrasting vertical and horizontal veneers
- Covered by Deanta’s 10-year manufacturer’s warranty
Fitting and care
Supplied pre-finished and ready to hang. If you trim the door, reseal the cut edges straight away; we can supply Deanta’s matching touch-up paint. Deanta’s care and installation guide has full instructions.
Sizes and weights
| Size (H × W × T) | Imperial | Weight |
|---|---|---|
| 1981 × 610 × 35 mm | 78" × 24" | 27 kg |
| 1981 × 686 × 35 mm | 78" × 27" | 30 kg |
| 1981 × 762 × 35 mm | 78" × 30" | 33 kg |
| 1981 × 838 × 35 mm | 78" × 33" | 36 kg |
Solid 18 mm lippings. Up to 32 mm in total can be trimmed from the width and from the height (16 mm per edge). Weights are per door, from Deanta's 2026 product data. Ask us about other sizes: odd sizes are our speciality.
Need an odd size?
Odd size doors are our speciality. If your opening is a non-standard size, bring us your measurements and our own joinery workshop can make a door to fit.
See them at our Ilford showroom: over 300 doors and over 200 handles on display, plus a large range of locks and door hardware, free parking, and odd sizes made to measure in our own workshop. Call 0208 599 0200.
Images are for illustrative purposes only