Deanta Torino Glazed Light Grey Ash FD30 Pre-finished Fire Door
Categories: Grey Glazed Fire Doors Deanta
£624.00
Description
See the Deanta Torino Glazed Light Grey Ash FD30 Pre-finished Fire Door on display in our Ilford showroom, where we have the full Deanta range side by side.
The diagonal Torino with a parallelogram of clear toughened glass cutting across the door. This version comes pre-finished in light grey ash, so it is ready to hang.
It is an FD30 fire door, giving up to 30 minutes of fire resistance when fitted in a suitable fire-rated frame. That makes it suitable where fire doors are required, such as loft conversions, flats and doors into an integral garage. It comes in three sizes, from 686 mm to 838 mm wide, all 1981 mm high. At 45 mm thick, it weighs between 38 kg and 42 kg depending on size. The trimming allowance is shown with the sizes below. If your opening is an odd size, our workshop can make a door to fit.
Key features
- FD30 fire door: up to 30 minutes of fire resistance when fitted as part of a correctly specified fire door assembly
- Crown Cut American Prefinished Light Grey Ash
- Third-party certification approved by Certifire© and BM TRADA Q-Mark
- FSC® Certified sustainable timber
- Fitted with 30 minute clear certified fire-rated glass
- Modern striking diagonal pattern, fine inlays
- Covered by Deanta’s 10-year manufacturer’s warranty
Fitting and care
Supplied pre-finished and ready to hang. If you trim the door, reseal the cut edges straight away; we can supply Deanta’s matching touch-up paint. Fire doors must be fitted in a suitable fire-rated frame with intumescent seals, fire-rated hinges and, where needed, a self-closer, and trimmed only within the limits of the fire certificate. Deanta’s care and installation guide has full instructions.
Sizes and weights
| Size (H × W × T) | Imperial | Weight |
|---|---|---|
| 1981 × 686 × 45 mm | 78" × 27" | 38 kg |
| 1981 × 762 × 45 mm | 78" × 30" | 40 kg |
| 1981 × 838 × 45 mm | 78" × 33" | 42 kg |
Solid 18 mm lippings. Up to 30 mm in total can be trimmed from the width and from the height (15 mm per edge), within the limits on the fire certificate. Weights are per door, from Deanta's 2026 product data. Ask us about other sizes: odd sizes are our speciality.
Need an odd size?
Odd size doors are our speciality. If your opening is a non-standard size, bring us your measurements and our own joinery workshop can make a door to fit.
See them at our Ilford showroom: over 300 doors and over 200 handles on display, plus a large range of locks and door hardware, free parking, and odd sizes made to measure in our own workshop. Call 0208 599 0200.
Images are for illustrative purposes only