Description

See the LPD Flush 20G FD30 Oak Pre-finished Fire Door in our Ilford showroom, alongside over 300 other doors on display.

A plain, practical flush door from LPD's 20G range, designed for commercial buildings as well as homes. This version comes pre-finished in oak, so it is ready to hang.

It is an FD30 fire door, giving up to 30 minutes of fire resistance when fitted in a suitable fire-rated frame. That makes it suitable where fire doors are required, such as loft conversions, flats and doors into an integral garage. At 44 mm thick, it weighs between 32 kg and 46 kg depending on size. LPD allows up to 5 mm to be trimmed from the long edges and 5 mm from the short edges, and trimming beyond this may affect the fire rating. If your opening is an odd size, our workshop can make a door to fit.

Key features

• Modern style
• Finish: Pre-finished Oak
• Glazing: Clear
• FD30 fire rated (30 minutes) when fitted in a suitable fire-rated frame
• Thickness: 44 mm

Sizes, weights and trimming

Trimming figures are LPD's limits. Do not trim beyond them, or the fire rating may be affected.

Fitting and care

This door is factory finished and ready to hang. Seal any edge you trim before hanging. Fire doors must be fitted in a suitable fire-rated frame with intumescent seals, fire-rated hinges and, where required, a self-closer.

Need an odd size?

Odd size doors are our speciality. If your opening is a non-standard size, bring us your measurements and our own joinery workshop can make a door to fit.

See them at our Ilford showroom: over 300 doors and over 200 handles on display, plus a large range of locks and door hardware, free parking, and odd sizes made to measure in our own workshop. Call 0208 599 0200.